$ {catalogItem}-$ {catalogLabel}

CAD모델 선택

사용 가능한 제품: 1

HELP_VARIABLE


Company	Ziehl
Description	TR600 analog
Bill of material	TR600 analog
ORDERNO	TR600 analog
AC15 ac15	4 A time-lag or miniature circuit-breaker MCB B4
ALTITUDE altitude	-5 °C … +70 °C
AMBIENT_TEMPERATURE_RANGE ambient temperature range	Up to 2000 m
ANALOG_OUTPUTS analog outputs	DC 02 V – 10 V , max. DC 10 mA
BURST burst	IEC 61000-4-2 +-4 kV contact, +- 8kV air
CLIMATIC_CONDITIONS climatic conditions	2…25 Hz ±1.6 mm 25 ... 150 Hz 5 g
CONTAMINATION_LEVEL contamination level	100%
CURRENT_OUTPUT current output	max. 500 Ω
DC13 dc13	3.15 A time-lag
DESIGN design	55 mm 8 TE
DIMENSIONS__H_X_W_X_D_ dimensions (h x w x d)	je 1 x 1,5 mm2
DISCHARGE_OF_STATIC_ELECTRICITY discharge of static electricity	-20 °C … +70 °C
E214025 e214025	Ie = 3 A ..... Ue = 250 V
EMITTED_INTERFERENCE emitted interference	90 x 35 x 58IEC 61000-4-5 +-4 kV Impulse 1,250 μs (820 μs)
EXPECTED_CONTACT_LIFE_ELECTRICAL expected contact life electrical	III
EXPECTED_CONTACT_LIFE_MECHANICAL expected contact life mechanical	4000 V
EXTERNAL_WIRING_TEMPERATURE_RANGE external wiring temperature range	Us – Relays, sensors, USB, analog output, Reset input - DC 3820 V Relays – sensors, USB, analog output, Reset input - DC 3820 V
FITTING_POSITION fitting position	approx. 360 g
GALVANIC_INSULATION_TEST_VOLTAGE galvanic insulation test-voltage	app. DC 18 V 3,5 mA
K1___K7 k1 … k7	max. AC 415 V
LINE_CONNECTION_SOLID_WIRE line connection solid wire	0,5 Nm (3,6 lb.in)
LOAD load	max. DC 16 V
MEASURING_CYCLE_TIME_SENSOR measuring cycle time sensor	±0,5 % of measured value ±1 digit
MEASURING_RANGE measuring range	max. 500 Ohm
MOUNTING_HEIGHT_WIDTH mounting height width	je 1 x 1,0 mm2
NO_GALVANIC_INSULATION no galvanic insulation	Type A, for connecting a USB stick to configuration to firmware update
NO_LOAD_VOLTAGE no-load voltage	1% of programmed span ±1 °C
NOMINAL_OPERATIONAL_CURRENT_IE nominal operational current ie	Ie = 2 A ..... Ue = 24 V Ie = 0,2 ..... A Ue = 125 V Ie = 0,1 ..... A Ue = 250 V
ON_TIME on-time	EN 61000-4-4 +-4 kV Pulse 550 ns, f = 5 kHz, t = 15 ms, T = 300 ms
OVERVOLTAGE_CATEGORY overvoltage category	300 V
POWER_CONSUMPTION power consumption	Pt 100 (RTD) acc. to EN 60751 (23- wire)
POWER_SUPPLY power supply	ACDC 24 – 240V
PROTECTION_CLASS_HOUSING protection class housing	any
PROTECTION_CLASS_TERMINALS protection class terminals	Snap mounting on 35 mm standard rail EN 60715 or M4 screws
RATED_IMPULSE_VOLTAGE rated impulse voltage	2
RATED_INSULATION_VOLTAGE_UI rated insulation voltage ui	EN 61000-6-3
RATED_SUPPLY_VOLTAGE_US rated supply voltage us	DC 20,4 - 297 V, AC 20 - 264 V 5060 Hz
RECOMMENDED_FUSE_NC recommended fuse nc	1 x 105 operations at AC 250 V 6 A
RECOMMENDED_FUSE_NO recommended fuse no	3 x 107 operations
RESET_INPUT_Y1Y2 reset input y1y2	V8
RESISTANCE_OF_SENSOR___WIRE_ resistance of sensor + wire.	≤0,7 mA
SENSOR_CONNECTION__6_SENSORS_ sensor connection (6 sensors)	-199°C .. 800°C, resolution = 1°C
SENSOR_CURRENT sensor current	≤ 1,5 s
STORAGE_TEMPERATURE_RANGE storage temperature range	5 – 85 % rel. humidity, no condensation
STRANDED_WIRE_WITH_ISOLATED_FERRULES stranded wire with isolated ferrules	IP 20
SURGE surge	-20 °C ... +65 °C
SWITCHING_CAPACITY switching capacity	250 V ac, 5 A, resistive
SWITCHING_CURRENT switching current	max. 1250 VA (resistive load) max. 120 W at DC 24 V
SWITCHING_VOLTAGE switching voltage	max. 5 A
TEMPERATURE_FACTOR temperature factor	OUT 1 and OUT 2
TOLERANCE tolerance	7 x 1 change-over contacts (CO)
TORQUE torque	IP 20
UL_ELECTRICAL_RATINGS ul electrical ratings	240 V ac, 12 hp 120 V ac, ¼ hp B 300 – pilot duty, UL 508
USB_CONNECTOR usb connector	140 x 90 x 58 mm
VIBRATION_RESISTANCE_EN_60068_2_6 vibration resistance en 60068-2-6	sensors, USB, analog output, Reset input
VOLTAGE_OUTPUT voltage-output	DC 04 mA – 20 mA
NAME name	TR600 analog

First name *
Last name *
email 주소 *
회사명 *
주소(시/군) *

지원되는 타사 쿠키 없음

TR600 analog