$ {catalogItem}-$ {catalogLabel}

CAD모델 선택

사용 가능한 제품: 1

HELP_VARIABLE


Company	Ziehl
Description	STW200
Bill of material	STW200
ORDERNO	STW200
ADJUSTING_RANGE adjusting range	1.5 A
ALARM_DELAY_T2 alarm delay t2	± 10%
CABLE_CAPACITANCE_WITH_LED_LAMP cable capacitance with led-lamp	= 2 s
CONTAMINATION_LEVEL contamination level	100 %
DESIGN design	4 TE
DIMENSIONS__W_X_H_X_D_ dimensions (w x h x d)	IP 30 IP 20
EMV___EMITTED_INTERFERENCE emv – emitted interference	V4, Polyamide PA 66, UL 94 V-2
EMV___INTERFERENCE_RESISTANCE emv – interference resistance	2…25 Hz ±1.6 mm 25 ... 150 Hz 5g
EXPECTED_CONTACT_LIFE_ELECTRICAL expected contact life electrical	250 V
EXPECTED_CONTACT_LIFE_MECHANICAL expected contact life mechanical	0.5 of max. switching capacity
FACTOR_OF_REDUCTION_AT_COSΦ___0_3 factor of reduction at cosϕ = 0,3	III
FREQUENCY_OF_MEASURED_SIGNAL frequency of measured signal	0.2 s
HYSTERESIS hysteresis	ca. 5 %
INPUT_F1_1 input f1.1	= 0.5 Ohm
INPUT_F1_2 input f1.2	0.1…1 A
INSTALLATION installation	1 x 4 mm2
LIMIT_I limit i	10…100 % of measuring range
MOUNTING_HEIGHT mounting height	90 x 70 x 58 mm
ON_TIME on-time	-40…+70 °C
OVERLOAD_CAPACITY_1_S overload capacity 1 s	max. 200 nF = approx. 500 m
OVERLOAD_CAPACITY_10_S overload capacity 10 s	45…65 Hz
OVERLOAD_CAPACITY_CONTINUOUSLY overload capacity continuously	10 A
OVERVOLTAGE_CATEGORY overvoltage category	4000 V
POWER_CONSUMPTION power consumption	3 VA
PROTECTION_HOUSING_TERMINALS protection housing terminals	1 x 2.5 mm2
RATED_AMBIENT_TEMPERATURE_RANGE rated ambient temperature range	EN 61000-6-2
RATED_IMPULSE_VOLTAGE rated impulse voltage	-40 °C ... +55 °C
RATED_INSULATION_VOLTAGE_UI rated insulation voltage ui	3
RATED_NOMINAL_CURRENT_IE__FOR_CO_ rated nominal current ie (for co)	3 x 107 switching cycles
RATED_SUPPLY_VOLTAGE_US_FREQUENCY rated supply voltage us frequency	AC 230 V 50 Hz
RECOMMENDED_FUSE recommended fuse	1 x 105 switching cycles at 240 V 6 A
REPEATING_ERROR repeating error	1 %
RESISTANCE_OF_INPUT resistance of input	3 A
SWITCH_ON_DELAY_T1 switch on delay t1	= 0.2 s
SWITCH_BACK_DELAY_T3 switch-back delay t3	0.4 %K
SWITCHING_CAPACITY switching capacity	3.15 A gl (slow)
SWITCHING_CURRENT switching current	3 A AC15 250 V; 2 A DC13 24 V
SWITCHING_VOLTAGE switching voltage	max. 2000 VA (ohm resistive load) max. 120 W at DC 24 V
TEMPERATURE_FOR_STORAGE temperature for storage	EN 50 081-1
TEMPERATURE_FACTOR temperature-factor	max. AC 415 V
TOLERANCE tolerance	± 20 %
TOLERANCE_AT_TU___25__C tolerance at tu = 25 °c	2 change-over contacts (CO)
TOLERANCE_OF_FREQUENCY tolerance of frequency	48 ... 62 Hz
TOLERANCE_OF_SUPPLY_VOLTAGE tolerance of supply voltage	0,85 … 1,1 Us
TYPE_OF_CONTACT type of contact	max. 6 A
VIBRATION_RESISTANCE_EN_60068_2_6 vibration resistance en 60068-2-6	55 mm
WIDTH width	Snap mount on 35 mm rail EN 60715 or with screws 2 x M 4
WIRE_CONNECTION_ONE_WIRE wire connection one wire	approx. 210 g
NAME name	STW200

First name *
Last name *
email 주소 *
회사명 *
주소(시/군) *

지원되는 타사 쿠키 없음

STW200