pulseCheck

CAD model selection

Selectable products: 1

HELP_VARIABLE


Company	APE
Description	pulseCheck
Bill of material	pulseCheck
ORDERNO	pulseCheck
CALIBRATION calibration	NIST traceable calibration certificate included
CONNECTION connection	USB
DELAY_RESOLUTION delay resolution	0.001 % of scan range; pulseCheck SM 1 fs
DETECTOR__OPTICS_SETS_ detector (optics sets)	PMT, PD, or TPA
FITTING_ROUTINE fitting routine	Gaussian, Sech2, Lorentz
INPUT_APERTURE input aperture	6 mm (free-space)
INPUT_BEAM_COUPLING input beam coupling	Free-space; Option fiber coupling FCPC, FCAPC, SMA
MAX_INPUT_POWER max input power	1 W (e.g. oscillator with a rep. rate of approx. 70 MHz) or 10 μJ (e.g. ampliﬁed system with rep. rates in the kHz range), whichever results in lower value
MEASURABLE_PULSE_WIDTH_RANGE measurable pulse width range	Depending on Base Unit 10 fs ... 3.5 ps 10 fs ... 12 ps 50 fs ... 35 ps 100 fs ... 500 ps (SM)
MODE_SWITCHING mode switching	Available for PMT, PD
OPTICS_SETS optics sets	Exchangeable
RECOMMENDED_REPETITION_RATE recommended repetition rate	PD, TPA 10 Hz and above; PMT 250 kHz and above
REMOTE_CONTROL remote control	Possible via TCPIP (SCPI command set)
SENSITIVITY sensitivity	Typically 1 ... 10-6 W2 depending on Optics Set
SHG_TUNING_FOR_PHASE_MATCHING shg tuning for phase matching	PMTPD automatic; TPA not applicable
SOFTWARE software	Included; Real-time display of pulse width and central wavelength, different fitting routines
TRIGGER_MODE trigger mode	TTL, f 50 kHz; pulseCheck SM 10 kHz
WAVELENGTH_RANGE wavelength range	200 nm - 12 µm, depends on Optics Set
NAME name	pulseCheck

First name *
Last name *
Email *
Company *
City *

No Third-party Cookies supported

pulseCheck