Gen II - Intellihot

CAD model selection

Selectable products: 6

HELP_VARIABLE


Company	Intellihot
Description	Gen II
Bill of material	iQ1001, Gen II
ORDERNO	iQ1001, Gen II iQ1001, Gen II
ALWAYS_VERTICAL always vertical	1
ASSEMBLY_CODE assembly code
CATEGORY category
CLASSIFICATION classification	0
COST cost	0
CUT_WITH_VOIDS_WHEN_LOADED cut with voids when loaded	0
DESCRIPTION description
DESIGN_OPTION design option	-1
DISPLAY display
DRAIN_PIPE_DIAMETER drain pipe diameter
FAMILY_NAME family name
HEIGHT height	64.000 64.000
HOST host	0
KEYNOTE keynote
LENGTH length
MANUFACTURER manufacturer
MASSUNIT massunit	1
MATERIAL_1 material 1
MATERIAL_2 material 2
MATERIAL_3 material 3
MODEL model
NPT_GAS_INLET_DIA_ npt gas inlet dia.
NPT_WATER_INLET_PIPE_DIA_ npt water inlet pipe dia.
NPT_WATER_OUTLET_DIA_ npt water outlet dia.
OMNICLASS_NUMBER omniclass number	23.75.00.00
OMNICLASS_TITLE omniclass title	Climate Control (HVAC)
PART_TYPE part type	0
ROOM_CALCULATION_POINT room calculation point	0
ROUND_CONNECTOR_DIMENSION round connector dimension	0 0
SHARED shared	0
TYPE_COMMENTS type comments
TYPE_IMAGE type image
TYPE_NAME type name
URL url
WIDTH width	30.000 30.000
WORK_PLANE_BASED work plane-based	0
NAME name	iQ1001, Gen II iQ1001, Gen II
APPARENT_POWER apparent power	2400 2400
BUILT_IN_REDUNDANCY built-in redundancy	Multiple Heat Engines w/ Individual Control Multiple Heat Engines w/ Individual Control
CASCADING cascading	Masterless, 4 units, Automatic Rotation Masterless, 4 units, Automatic Rotation
COMMON_VENTING common venting	Yes - up to 4 units Yes - up to 4 units
CONDENSATE_DRAIN_CONNECTION condensate drain connection	0.750 0.750
DEPTH depth	43.398 43.398
DRAIN_PIPE drain pipe	0.375 0.375
FUEL fuel	Preset for NG / LP convertible without additional parts Preset for NG / LP convertible without additional parts
GAS_CONNECTION_NPT gas connection npt	1.250 1.250
GAS_INLET_CONNECTION gas inlet connection	0.625 0.625
GAS_PRESSURE_FOR_ADJUSTMENTS gas pressure for adjustments	8” for NG, 11” for LP 8” for NG, 11” for LP
HEAT_EXCHANGER heat exchanger	Expandable, Stainless 316L Expandable, Stainless 316L
HIGH_TURN_DOWN high turn down	33:1 TDR per i1000 Quad; 132:1 TDR (4 x iQ1000 / 4MMBH) 33:1 TDR per i1000 Quad; 132:1 TDR (4 x iQ1000 / 4MMBH)
HOT_WATER_CAPACITY__100F_RISE_ hot water capacity (100f rise)	14.5 14.5
HOT_WATER_CAPACITY__140F_RISE_ hot water capacity (140f rise)	10.3 10.3
HOT_WATER_CAPACITY__45F_RISE_ hot water capacity (45f rise)	32.1 32.1
HOT_WATER_CAPACITY__80F_RISE_ hot water capacity (80f rise)	18.1 18.1
HOT_WATER_CAPACITY__90F_RISE_ hot water capacity (90f rise)	16.1 16.1
IGNITION ignition	Electronic Spark Ignition Electronic Spark Ignition
INSTALLATION_LOCATION_AMBIENT_TEMPERATURE installation location ambient temperature	40°F – 130°F 40°F – 130°F
INTERNAL_WATER_VOLUME__GALLONS_ internal water volume (gallons)	4 4
LISTING listing	ETL (Z21.10.3 / CSA 4.3), ASME HLW ETL (Z21.10.3 / CSA 4.3), ASME HLW
LOAD_CLASSIFICATION load classification
MAXIMUM_CONDENSATE_FLOW_RATE__GPH_ maximum condensate flow rate (gph)	5.4 5.4
MAXIMUM_INPUT__BTU_H_ maximum input (btu/h)	750,000 750,000
MAXIMUM_OUTPUT__BTU_H_ maximum output (btu/h)	720,000 720,000
MINIMUM_INPUT__BTU_H_ minimum input (btu/h)	30,000 30,000
NG_LP___MAXIMUM_STATIC_GAS_PRESSURE ng/lp - maximum static gas pressure	14” 14”
NG_LP___MIN__DYNAMIC_GAS_PRESSURE__FULL_FIRE_ ng/lp - min. dynamic gas pressure (full fire)	2.5” (non-corrugated, black iron) 2.5” (non-corrugated, black iron)
NUMBER_OF_POLES number of poles	1 1
POWER_CONSUMPTION power consumption	20 20
PRESSURE_RELIEF_VALVE pressure relief valve	1” Ø / Select Btu/h Input Rating to match Model Maximum Input / 160 PSIG 1” Ø / Select Btu/h Input Rating to match Model Maximum Input / 160 PSIG
SAFETY safety	Flame Rod, Thermal Fuse, Overheat Prevention Device, Fan Speed Monitor, Flue Temperature Monitor, Blocked Vent Detector, Dual Flame Sensing Flame Rod, Thermal Fuse, Overheat Prevention Device, Fan Speed Monitor, Flue Temperature Monitor, Blocked Vent Detector, Dual Flame Sensing
SERVICE_CLEARANCES service clearances	64 X 30 X 43.4 (48 cu. ft) 64 X 30 X 43.4 (48 cu. ft)
TEMPERATURE_RANGE temperature range	100°F – 190°F 100°F – 190°F
TEMPERATURE_STABILITY temperature stability	+/- 4°F +/- 4°F
THERMAL_EFFICIENCY thermal efficiency	90 90
TURN_DOWN_RATIO__TDR_ turn down ratio (tdr)	25:1 25:1
TYPE type	Indoor, Floor Mounted, Condensing, Fully Modulating, On-demand Boiler Indoor, Floor Mounted, Condensing, Fully Modulating, On-demand Boiler
VENT_CONNECTION_RADIUS vent connection radius	3.000 3.000
VENT_SIZE__DIAMETER_ vent size (diameter)	6.000 6.000
VENTING_MATERIALS__CANADA_ venting materials (canada)	Type BH Gas Vent Classes: II A (PVC), II B (CPVC), II C (Polypropylene), I (AL294C SS) Type BH Gas Vent Classes: II A (PVC), II B (CPVC), II C (Polypropylene), I (AL294C SS)
VENTING_MATERIALS__USA_ venting materials (usa)	Sch. 40 PVC, Sch. 40 CPVC, Polypropylene, Stainless Steel Sch. 40 PVC, Sch. 40 CPVC, Polypropylene, Stainless Steel
VENTING_TYPE venting type	Direct Vent (2 pipe - intake & exhaust), Power Vent (1 pipe - exhaust only) Direct Vent (2 pipe - intake & exhaust), Power Vent (1 pipe - exhaust only)
VOLTAGE voltage	120.000 120.000
WATER_CONNECTION_REDIUS water connection redius	1.000 1.000
WATER_INLET___OUTLET_CONNECTION water inlet / outlet connection	2.000 2.000
WATER_PRESSURE_MIN___MAX__PSIG_ water pressure min / max (psig)	30 / 160 30 / 160
WEIGHT__IBS_ weight (ibs)	525 525
ELECTRICAL electrical
HOT_WATER_CAPACITY__70F_RISE_ hot water capacity (70f rise)
PRESSURE_RELIEF_VALVE__SELECT_BTU_HR_INPUT_RATING_TO_MATCH_MODEL_MAX_INPUT_ pressure relief valve (select btu/hr input rating to match model max input)
WARRANTY__WITH_RECIRCULATION__AND_UNLIMITED_THERMAL_CYCLES_ warranty (with recirculation, and unlimited thermal cycles)
WEIGHT__LBS_ weight (lbs)

First name *
Last name *
Email *
Company *
City *

No Third-party Cookies supported

iQ1001, Gen II