$ {catalogItem}-$ {catalogLabel}

CAD모델 선택

사용 가능한 제품: 1

HELP_VARIABLE


Company	AGS
Description	Merlin LPG XS
Bill of material	AGS LPGXS LPG Detector
ORDERNO	AGS LPGXS LPG Detector
ALWAYS_VERTICAL always vertical	1
COST cost	0
CUT_WITH_VOIDS_WHEN_LOADED cut with voids when loaded	0
DEFAULT_ELEVATION default elevation	0
DEFAULT_HEIGHT default height	4.000
DESCRIPTION description	Description The XS range of AGS detectors work in combination with the AGS Merlin range of Gas Detection panels and Utility Controllers. Passive, semiconductor type sensor for industrial and commercial indoor applications. Compact, modern, digital design makes the units aesthetically pleasing and easy to install. Application Monitors boiler rooms, mechanical rooms, kitchens, hospitality and other commercial spaces involving Liquid Petroleum Gas (LPG). The XS range of detectors signal AGS Merlin controllers that an alarm condition has occurred. The detectors are suitable for all indoor applications and can be mounted onto single gang rough in box or directly onto a junction box.
DESIGN_OPTION design option	-1
HOST host	0
LOAD load	120.000
MANUFACTURER manufacturer	American Gas Saftey, LLC.
MASSUNIT massunit	1
MODEL model	AGS LPGXS LPG Detector
OMNICLASS_NUMBER omniclass number	23.80.30.11.17
OMNICLASS_TITLE omniclass title	Distribution Boards and Control Panels
PART_TYPE part type	17
PRODUCT_INFORMATION product information	https://americangassafety.com/product/merlin-lpg-gas-detector/
ROOM_CALCULATION_POINT room calculation point	0
ROUND_CONNECTOR_DIMENSION round connector dimension	1
SHARED shared	0
SUBFEED_LUGS subfeed lugs	0
TYPE_COMMENTS type comments	The LPG sensor should be mounted in accordance with certain considerations. Do not position next to burners, heaters or ovens where temperatures above the room ambient may be experienced. It is, if possible, better to mount the sensors on the opposite wall. This is, of course, dependant on the size of the protected area. LPG is heavier than air and will therefore drop, meaning the Gas sensor should be mounted 10 inches from the floor of the protected area. The LPG detectors at detection will go into alarm at 10% of the low explosion level. This will trigger isolation of the power supply to the solenoid and as such isolation of the gas supply. This can then be rectified by resolving the leak, allowing the sensor head to clear and resetting the attached Merlin panel.
URL url	https://americangassafety.com/product/merlin-lpg-gas-detector/
VERSION version	2019
VOLTAGE voltage	120VAC
WORK_PLANE_BASED work plane-based	0
NAME name	AGS LPGXS LPG Detector

First name *
성 *
email 주소 *
회사명 *
주소(시/군) *

지원되는 타사 쿠키 없음

AGS LPGXS LPG Detector