$ {catalogItem}-$ {catalogLabel}

CAD모델 선택

사용 가능한 제품: 1

HELP_VARIABLE


Company	CANchecked
Description	CFE18
Bill of material	CFE18
ORDERNO	CFE18
CFE18___CAN_BUS_TERMINATION cfe18 - can bus termination	A solder jumper is attached to the circuit board. If you close this, the Can Bus termination with 120 Ohm is active. The solder jumper is OPEN by default .
CONNECTION_OPTIONS connection options	Switches and trimpots (adjustment buttons) can be connected to the CFE18. But sensors such as oil pressure, fuel pressure, boost pressure, exhaust back pressure and integration in a separate housing would also be conceivable.
CONNECTIONS connections	12V/GND (top) Power supply 6-22V (reverse polarity protected) A0-A8 9 analog inputs (0-5V) D0-D8 9 digital inputs (maximum 5V) (internal pull-up 20-50K) 5V / SGND Power supply for analog sensors or sensor ground CANL / CANH Can bus connection (Can Low, Can High) CAN 2.0 A / B - 125, 250, 500, 1000 kbps RX /TX/DTR/GND optional: for any updates (additional hardware required)
NAME name	CFE18