$ {catalogItem}-$ {catalogLabel}

CAD모델 선택

사용 가능한 제품: 1

HELP_VARIABLE


Company	Backflow Direct
Description	BFD-8030
Bill of material	BFD-8030
ORDERNO	BFD-8030
ALWAYS_VERTICAL always vertical	1
ASSEMBLY_CODE assembly code	DCDA-II
CATEGORY category
CLASSIFICATION classification	0
COST cost	0
CUT_WITH_VOIDS_WHEN_LOADED cut with voids when loaded	0
DESCRIPTION description	The Deringer 30 Double Check Detector Assembly prevents non-health hazard pollutants from entering a potable water supply system when backpressure and/or backsiphonage conditions occur. Used primarily on fire sprinkler systems when monitoring of unathorized water use is required.
DESIGN_OPTION design option	-1
FAMILY_NAME family name
HB hb	5.400
HOST host	0
HT ht	10.400
KEYNOTE keynote
LENGTH length	30.700
MANUFACTURER manufacturer	BACKFLOW DIRECT
MASSUNIT massunit	1
MODEL model	DERINGER 20
OMNICLASS_NUMBER omniclass number	23.75.00.00
OMNICLASS_TITLE omniclass title	Climate Control (HVAC)
PART_TYPE part type	0
ROOM_CALCULATION_POINT room calculation point	0
ROUND_CONNECTOR_DIMENSION round connector dimension	1
SHARED shared	0
SHUT_OFF_VALVE_TYPE shut off valve type	Butterfly Valve
SPECIFICATION specification	The Deringer 30 Double Check Detector Assembly shall utilize two independent Dual Action Check modules and two integral resiliently seated shut-off valves all of which shall be contained within a single rigid valve housing constructed entirely of 304 stainless steel. Both integral shutoff valves shall include pre-wired supervisory tamper switches contained within a weatherproof actuator housing approved for both indoor and outdoor use. Dual Action Check modules shall operate as a “poppet style” check under low flow conditions, operate as a “swing style” check under high flow conditions and utilize replaceable silicone elastomer sealing discs. Assembly test cocks shall be handle-less and operate via a tamper resistant actuator. Assembly shall have a single full access service port and cover with an “inline” replaceable elastomer seal. The bypass assembly shall include a meter registering either gallons or cubic feet, a single check valve and required test cocks. Assembly shall be serviceable without special tools and approved for both horizontal and vertical applications.
TYPE_COMMENTS type comments
TYPE_IMAGE type image
TYPE_NAME type name
URL url	http://www.armoredworks.com/www.armoredworks.com/backflow/images/Downloads-Tab/Specification-Sheets/Downloads/Deringer-20-Specification-Sheet.pdf
VALVE_TYPE valve type	Double Check Detector Assembly
WORK_PLANE_BASED work plane-based	0
NAME name	BFD-8030

First name *
Last name *
email 주소 *
회사명 *
주소(시/군) *

지원되는 타사 쿠키 없음

BFD-8030