$ {catalogItem}-$ {catalogLabel}

CAD모델 선택

사용 가능한 제품: 1

HELP_VARIABLE


Company	Backflow Direct
Description	BFD-6050X
Bill of material	BFD-6050X
ORDERNO	BFD-6050X
ALWAYS_VERTICAL always vertical	1
ASSEMBLY_CODE assembly code	RPDA-II
CATEGORY category
CLASSIFICATION classification	0
COST cost	0
CUT_WITH_VOIDS_WHEN_LOADED cut with voids when loaded	0
DESCRIPTION description	The Deringer 50 Reduced Pressure Detector Assemby prevents non-health hazard pollutants and hazardous contaminants entering a potable water supply system when backpressure and/or backsiphonage conditions occur. Used primarily on fire sprinkler systems when monitoring of unathorized water use is required.
DESIGN_OPTION design option	-1
FAMILY_NAME family name
HB hb	4.800
HOST host	0
HT ht	9.600
KEYNOTE keynote
LENGTH length	28.400
MANUFACTURER manufacturer	BACKFLOW DIRECT
MASSUNIT massunit	1
MODEL model	DERINGER 20
OMNICLASS_NUMBER omniclass number	23.75.00.00
OMNICLASS_TITLE omniclass title	Climate Control (HVAC)
PART_TYPE part type	0
ROOM_CALCULATION_POINT room calculation point	0
ROUND_CONNECTOR_DIMENSION round connector dimension	1
SHARED shared	0
SHUT_OFF_VALVE_TYPE shut off valve type	Butterfly Valve
SPECIFICATION specification	The Deringer 50 Reduce Pressure Detector Assembly (RPDA) valve shall utilize two independent Dual Action Check modules and two integral resiliently seated shut-off valves all of which shall be contained within a single rigid valve housing constructed entirely of 304 stainless steel. Both integral shutoff valves shall include pre-wired supervisory tamper switches contained within a weatherproof actuator housing approved for both indoor and outdoor use. Dual Action Check modules shall operate as a “poppet style” check under low flow conditions, operate as a “swing style” check under high flow conditions and utilize replaceable silicone elastomer sealing discs. Assembly test cocks shall be handle-less and operate via a tamper resistant actuator. Assembly shall have a single full access service port and cover with an “inline” replaceable elastomer seal. All bypass assembly components shall be lead free and include a meter registering either gallons or cubic feet, a single check valve and required test cocks. The Relief Valve shall operate using only static seals (zero dynamic/sliding seals). All wetted surface Relief Valve components shall be constructed of stainless steel. Assembly shall be serviceable without special tools.
TYPE_COMMENTS type comments
TYPE_IMAGE type image
TYPE_NAME type name
URL url	http://www.armoredworks.com/www.armoredworks.com/backflow/images/Downloads-Tab/Specification-Sheets/Downloads/Deringer-20-Specification-Sheet.pdf
VALVE_TYPE valve type	Reduced Pressure Detector Assembly
WORK_PLANE_BASED work plane-based	0
NAME name	BFD-6050X

First name *
Last name *
email 주소 *
회사명 *
주소(시/군) *

지원되는 타사 쿠키 없음

BFD-6050X